Catalog
All Products
Here you'll find a searchable list of all our products.
- Extended 8m
- retracted 1.8
- 50kg payload
- 6 sections
- electric winch
- sprial cable
- white in colour
- optional rotating head
- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 60 mm (OD) pole, various heights
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made
- Ultra lightweight fully engineered design
- 3.1 to 21 m tower heights
- 220 mm wide body (180 mm faced)
- 3100 mm modular lengths
- 42x3 mm aluminium CHS legs
- 25x3 mm lattice braces
- Low maintenance aluminium construction
- Antennas up to 900mm
- Ultra lightweight fully engineered design
- 220 mm wide body
- 3100 mm modular lengths
- 40 x 3 mm aluminium CHS legs
- 25 x 3 mm lattice structure
- Low maintenance aluminium construction
- Mounts to APAC AL220 Aluminium Towers
- Quad-sector headframe
- ABAB sector deployment for multipoint
- Great for 360° multi angle camera/CCTV systems
- Custom designs available
- Mounts to APAC AL220 Aluminium Towers
- Tri-sector headframe
- Ideal for WISP and Private LTE
- 360° camera/CCTV systems
- Ideal Smart Farm IoT base station
- Fully customisable
- Mounts to APAC AL220 Aluminium Towers
- Tri-sector headframe
- Ideal for UMTS/LTE eNB
- 360° camera/CCTV systems
- Stackable design - same top bolt pattern as AL220 module
- Fully customisable
- Mounts to APAC AL220 Aluminium Towers
- Twin-sector headframe
- Ideal for MIMO base station installations
- Great for 'butterfly' 90/120° LTE sectors
- Constructed from 6005 T5 structural aluminium
- Custom designs available
- Ultra lightweight design
- Attaches to AL220 lattice modules
- 900 mm height, 50 x 4 mm round tube
- 40 x 6 mm aluminium flat bar gussets
- Low maintenance aluminium construction
- Durable aluminium gin pole
- Attaches to AL220 lattice modules
- Suitable for tower heights to 15.5 m
- Winch cable guide and pulley wheel
- Lightweight winch-up design
- Heavy duty galvanised tripod outrigger base
- <1 hour setup time
- 11 m total height (9.3 m lattice)
- 220 mm wide body (180 mm faced)
- 3100 mm section lengths
- Quick, simple winch raising (winch included)
- Low maintenance aluminium construction
- Lightweight hand-raised design
- Aluminium tripod outrigger base
- 4.7 m total height (3.1 m lattice)
- 220 mm wide body (180 mm faced)
- 3100 mm section lengths
- Solid aluminium billet hinge
- Low maintenance aluminium construction
- Lightweight winch-up design
- Heavy duty galvanised tripod outrigger base
- <1 hour setup time
- 8 m total height (6.2 m lattice)
- 220 mm wide body (180 mm faced)
- 3100 mm section lengths
- Quick, simple winch raising (winch included)
- Low maintenance aluminium construction
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 18.6 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 galvanised steel guy wires
- 3.1 to 21.7 m tower models available
- AL220 design workable to 37m
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 3 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 galvanised steel guy wires
- 3.1 to 21.7 m tower models available
- AL220 design workable to 37m.
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 6 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 stainless steel guy wires
- 3.1 to 21.7 m tower models available
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 9 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 stainless steel guy wires
- 3.1 to 21.7 m tower models available
- Antennas up to 900mm
- Anti-twist torque arm
- Up to Six-way guying
- For APAC AL220 aluminium lattice towers
- Bolt-together aluminium design
- U-bolt attachment to tower
- Designed to increase torsional resistance on guyed towers
- Simple installation
- Durable, modular design
- Heavy duty galvanised tripod outrigger base, hinged and pinned
- 5min deployment time
- 4 m total length
- to suit AL220 tower sections or AL340 tower sections
- Low maintenance galvanised construction
- Optional Extra for the AL tower range
- Optional pintle hook for towing short distances
- Offroad tyres with Aluminium hubs
- supporting jack up legs
- Lightweight fully engineered design
- 3.1 to 40.7 m tower heights
- 340 mm wide body
- 3100 mm modular lengths
- 50 x 4 mm aluminium CHS legs
- 32 x 3 mm lattice structure
- Low maintenance aluminium construction
- Antennas up to 900mm
- Ultra lightweight fully engineered design
- 3.1 to 40 m tower heights
- 340 mm wide body (300 mm faced)
- 3100 mm modular lengths
- 50x4 mm aluminium CHS legs
- 32x3 mm lattice braces
- Low maintenance aluminium construction
- Antennas up to 900mm
- Ultra lightweight fully engineered design
- 3.1 to 40 m tower heights
- 340 mm wide body (300 mm faced)
- 3100 mm modular lengths
- 50x4 mm aluminium CHS legs
- 32x3 mm lattice braces
- Low maintenance aluminium construction
- Antennas up to 900mm
- Lightweight fully engineered design
- 340 mm wide body
- 3100 mm modular lengths
- 50 x 4 mm aluminium CHS legs
- 32 x 3 mm lattice structure
- Low maintenance aluminium construction
- Mounts to APAC AL340 Aluminium Towers
- Tri-sector headframe
- Ideal for WISP and Private LTE
- 360° camera/CCTV systems
- Ideal Smart Farm IoT base station
- Fully customisable
- Durable, low deflection design
- Heavy duty galvanised tripod outrigger base
- 1 hour deployment time
- 11 m total height (9.3 m lattice)
- 340 mm wide body
- 3100 mm section lengths
- Quick, simple winch raising (winch included)
- Low maintenance aluminium construction
- Durable, low deflection design
- Heavy duty galvanised tripod outrigger base
- 1-2 hour deployment time
- 14 m total height (12.4 m lattice)
- 340 mm wide body
- 3100 mm section lengths
- AL340 design workable to 40m
- Quick, simple winch raising (winch included)
- Low maintenance aluminium construction
- Durable, low deflection design
- Heavy duty galvanised tripod outrigger base
- <1 hour deployment time
- 8 m total height (6.2 m lattice)
- 340 mm wide body
- 3100 mm section lengths
- Quick, simple winch raising (winch included)
- Low maintenance aluminium construction
- 80x40x6 structural aluminium channel
- Anti-twist torque arm
- Up to Six-way guying
- For APAC AL340 aluminium lattice towers
- Bolt-together aluminium design
- U-bolt attachment to tower
- Designed to increase torsional resistance on guyed towers
- 3.1 to 37.2 m tower heights
- 500 mm wide body
- 3100 mm modular lengths
- 76.2 x 4.75 mm aluminium CHS legs
- 40 x 3 mm lattice structure
- Low maintenance aluminium construction
- Rigid stackable design
- 500 mm wide body
- 3100 mm modular lengths
- 76.2 x 4.75 mm aluminium CHS legs
- 40 x 3 mm lattice structure
- Low maintenance aluminium construction
- Rigid stackable design
- 3.1 to 9.3 m tower heights
- 500 mm wide body
- 3100 mm modular lengths
- 76.2 x 76.2 x 4.75 mm aluminium SHS legs
- 40 x 3 mm lattice structure
- Low maintenance aluminium construction
- Height: 9.4 meters
- Material: Aluminium (AS 1866 6061T6 for legs, AS 1866 6060T5 for braces)
- Wind Region Compliance: B1 & B2
- Modular design for easy assembly
- Capacity: Supports a Ø900mm parabolic antenna
- Legs: Ø76.2x6.35 CHS
- Braces: Ø32x3 CHS
- Connection Plate: 16mm Plate AS1734 6061T651
- Bolts: M16 AS/NZS1252.1 GR8.8/S, hot-dip galvanized
- 6061 Aluminium Construction.
- Suits Poles and Masts 20-50mm.
- Starlink Locking Mechanism Machined into Adaptor.
- Made in Caloundra, Sunshine Coast, QLD.
- ATV Wheels
- solid 50mm galvanised axle with stainless slip over
- stainless U bolts
- 75x50x3 6061 drawbar
- Galvanised Hitch
- Aluminium wheels
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- Road/ATV Wheels
- solid 50mm galvanised axle
- Galvanised eye to eye leaf springs
- 125x60x10 6061 drawbar
- Aluminium wheels
- Drainable Bouy/cone storage area in rear
- Fully enclosed washable beach side
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- ATV type Wheels
- solid 50mm galvanised axles
- 101x50x10 6061 drawbar
- Aluminium Hubs
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- 4x4 Wheels
- solid 50mm galvanised axle
- Galvanised eye to eye leaf springs
- 150x75x10 6061 drawbar
- Aluminium wheels
- V brace
- centering V
- Hydraulic brakes
- synthetic winch rope with 1.2tonne braked winch
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- Cell on Wheels set up available
- 6 Month Lease and Hire Options Available
- Six metre dual-stage mast
- 50 mm axle with drum brakes
- Galvanised chassis and cabinets
- Slide-out 1.0 tonne stabilising outriggers
- High quality Australian made product
- Full custom builds available; mine, aero, and mil-spec builds
- All Aluminium
- Dual Axle LT tyres
- electric brakes
- Galvanised Axles
- optional Motor lift and holder
- optional removable board racking for mutiple use trailer
- optional colours available
- loading ramp
- side access doors
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Road Wheels
- solid 50mm galvanised axles
- Galvanised eye to eye load sharing leaf springs
- 125x60x10 6061 drawbar
- Aluminium wheels
- Optional Drainable Bouy/cone storage area in front
- Spare wheel
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- Low Profile.
- Aluminium roof mount, universal stud pattern.
- Remove existing roof scews and mount using existing screw holes.
- This base is used on our guyed lattice towers up to 31m in height.
- SSV type Wheels
- solid 50mm galvanised axle
- 101x50x10 6061 drawbar
- Aluminium Hubs
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- 6061 Aluminium Construction.
- Made in Caloundra, Sunshine Coast, QLD.
- To Suit 75mm-100mm Drawbar.
- 300x50mm Mounting Tube Suits Most Starlink Pole Adaptors.
- Can be produced in minimum batches of 10 to suit custom specifications.
- Low Profile Aluminium Facia Mount.
- 200x80x6mm 6061 Mounting Plate with 50x4mm Tube.
- 300mm Standoff with 500mm Height.
- 6061 T5 Aluminium Construction
- Made locally in Caloundra, Sunshine Coast, QLD
- Suits most flat mounting surfaces - Roofs, Motorhomes, Caravans, Canopies etc.
- 50mm mounting spigot that suits our Starlink adaptor and most others on the market.
- 6061 T5 Aluminium construction
- Suits Ray Marine Radome
- Radome can be supplied to businesses within Australia, Bracket only available overseas.
- starlink locking mechanism machined in as standard,
- made locally in Caloundra Sunshine Coast QLD
- 6061 T5 Aluminium construction
- suits pole sizes 20-50mm
- starlink locking mechanism machined in as standard, don't rely just on a grub screw like other inferior brands.
- made locally in Caloundra Sunshine Coast QLD
- 500mm height as standard up to 1500mm
- various sizes available -please enquire
- Light Weight Aluminium Tripod, 1200mm Collapsed Length.
- 6061 Aluminium Construction.
- 100x50mm Mounting Spigot Suits Most Starlink Adaptors.
- 3x Guy Points On the Mounting Spigot and Tripod Base.
- 1.2m to 6m Adjustable Deployment Height.
- Fast Deployment Utilizing Locking Pins and Quick Release Camlock Fittings.
- Suits any application where you need an offset/standoff mount
- For masts 14 to 114 mm in diameter
- Heavy duty clamp
- 10 mm material
- Offset mounting
- Custom designed
- AL220 tower sections designed with a focus on lightweight construction and strength.
- Convenient hinged 290mm x 290mm x 12mm aluminum base plate for easy raising and lowering.
- Heights available in a range from 3.1m to 6.2m, providing flexibility for different applications.
- Base designed to fit Surefoot S400/600 foundations or custom ground cages and concrete pads.
- Customizable designs available to meet specific requirements.
- Low maintenance aluminum construction ensures durability and longevity.
- AL340 tower sections designed with a focus on lightweight construction and strength.
- Convenient hinged 500mm x 365mm x 12mm stainless steel base plate for easy raising and lowering.
- Heights available in a range from 3.1m to 6.2m, providing flexibility for different applications.
- Base designed to fit Surefoot S600 foundations or custom ground cages and concrete pads.
- Customizable designs available to meet specific requirements.
- Low maintenance aluminum construction ensures durability and longevity.
- Road Wheels
- solid 50mm galvanised axle
- 40+ nipper boards, 2x rescue, 4x bouy
- 125x60x10 6061 drawbar
- Aluminium wheels
- Drainable Bouy/cone storage area in front
- Spare wheel
- Stainless hardware supplied with carbon grease
- High quality Australian made product
- Full custom builds available;
- Lightweight 100x100x6 aluminum box section
- Heights available in the range of 2m to 6.5m
- 400mm x 400mm x 12mm aluminum gusseted base designed to fit Surefoot S600 or custom ground cages
- Custom designs available to meet specific requirements
- Low maintenance aluminum construction for durability and ease of upkeep
- Aluminium Construction
- powder coating available
- 12mm gussets
- mounts to factory bolt positions
- retains factory winch mounting holes
- 50x4 end tubes
- Additional IRB engine mounting plates supplied for SLSA clubs
- 6 Month Lease and hire options available
- 10 metre aluminium lattice tower
- 4m, 7m and 10m heights available
- 50 kg lifting capacity
- Galvanised/Aluminium body, aluminium coms cabinet
- High quality Australian made product
- Full custom builds available; mine, aero, and mil-spec builds
- Lift assist solar panels
- guy wires available
- 100% Australian built with Australian steels.
- 6 Month Lease and hire options available
- four metre aluminium lattice tower
- 4m, 7m and 10m heights available
- 50 kg lifting capacity
- Galvanised/Aluminium body, aluminium coms cabinet
- High quality Australian made product
- Full custom builds available; mine, aero, and mil-spec builds
- 100% Australian built with Australian steels.
- 6 Month Lease and hire options available
- Seven metre aluminium lattice tower
- 4m, 7m and 10m heights available
- 50 kg lifting capacity
- Galvanised/Aluminium body, aluminium coms cabinet
- High quality Australian made product
- Full custom builds available; mine, aero, and mil-spec builds
- Lift assist solar panels
- 100% australian built with Australian steels.
- 6 Month Lease and hire options available
- Seven metre dual-stage mast
- 50 kg (engineered) lifting capacity
- 50 mm axle with drum brakes
- Galvanised body, high impact yellow cabinets
- High quality Australian made product
- Full custom builds available; mine, aero, and mil-spec builds
- Customisable sizes,
- suits most solar panel configurations
- 40 to 114mm pole sizes
- Tapered octagonal poles
- Aluminium construction
- Fully adjustable
- 6061 Aluminium Construction.
- Made in Caloundra, Sunshine Coast, QLD.
- 3x Guy Points.
- 100x50mm Mounting Tube to Suit Most Starlink Adaptors.
- Mounts to APAC Hand Raised Telescopic Masts (sold seperately).
- Al-ko Drawbar mount, 50mm, fits most drawbars
- Aluminium Towball mount, 50mm, fits most vehicles
- Three, Five and seven metre designs available
- High grade acetal and anodised aluminium construction
- Hand-portable, hand-raised design
- Quick-release locking
- Universal mounting spigot
- Innovative custom builds available
- 100% Australian Designed & Manufactured
- Climbable foot-pegs to three metres
- 5 metre total height, two section design
- Aluminium 60 mm (OD) pole, with 50 mm top section
- Rotatable top section with optional mast heads
- Guyed at the three and five metre marks for exceptional stability
- Mounts to APAC AT90 series Climbable Monopoles
- Quad-sector headframe
- ABAB sector deployment for multipoint
- Great for UMTS/LTE eNB
- Stackable, same mounting bolt pattern on top
- Custom designs available
- Mounts to APAC Climbable Monopoles
- Tri-sector headframe
- Ideal for UMTS/LTE eNB
- ABC sector deployment for multipoint
- Stackable, same mounting bolt pattern on top
- Custom designs available
- 90 O/D x 3 mm aluminium monopole
- 300 mm step spacing
- 3000 mm section lengths
- Very light weight, easily raised
- Low maintenance aluminium construction
- Stackable modular mast to a height of 12 m
- Australian designed and manufactured.
- 90 O/D x 3 mm aluminium monopole
- 300 mm step spacing
- 3000 mm section lengths
- Very light weight, easily raised
- Machined 50 tonne universal-joint base
- Stackable modular mast to a height of 12 m
- Australian designed and manufactured.
- Auto Brake Winch
- RBW2500-16
- Load Max 1135 kg
- Gear Ratio 11.1 to 1
- Cable 6.35 mm x 17 m
- Weight 6.3kg
- Entry-grade, low cost roof mast
- Galvanised 48 mm (OD) pole, various heights
- Screw-together design
- Roof pitches up to 45 degrees
- 100% Australian made
- 3g, 4g, 5g
- Bolt/Clamp.
- Includes a 10mm-16 X 135mm carriage bolt.
- two clamps per unit
- Slot will accommodate 19mm width Giant Band
- 1200mm of strapping included, custom sizes available.
- Light Weight Aluminium
- weather proof seat and seat belt
- locking mechanisms to handle 500KG of force, this can hold a space case to be tied down
- roller bearing for spinal board placement
- Pole mounted, clamp or U bolt option
- 1200 mm length, 320 mm stand-off distance
- 50 mm O/D aluminium tube construction
- Fully customisable, built to specification.
- Pole mounted, clamp or U bolt option
- 1200 mm length, 320 mm stand-off distance
- Hot dip galvanised steel construction
- Clamping design with M12 bolts
- Heavy duty 4 mm jaw clamps
- Fully customisable, built to specification.
- Pole mounted, clamp or U bolt option
- 500 mm length, 1000 mm stand-off distance
- Acid-finish aluminium construction
- Switchable vertical or horizontal mounting
- Heavy duty 10 mm mount plate
- Fully customisable, built to specification.
- Perpendicular (90º) right angle mount
- For poles 20 to 114 mm in diameter
- 3 mm Stainless
- Fully customisable
- Durable, low deflection design
- Ultra heavy duty galvanised tripod outrigger base
- 4 hour deployment time
- 15 m total height (12.4 m lattice)
- 500 mm wide body
- 3100 mm section lengths
- Quick, simple winch raising (winch included)
- CWL-200L Electric Winch with Remote Control
- Durable, low deflection design
- Ultra heavy duty galvanised tripod outrigger base
- 4.5 tonne levelling jacks
- 4 hour deployment time
- 18 m total height (15.5 m lattice)
- 500 mm wide body
- 3100 mm section lengths
- CWL-301 Electric Winch with Remote Control
- Durable, low deflection design
- Ultra heavy duty galvanised tripod outrigger base
- 4 hour deployment time
- 21 m total height (18.6 m lattice)
- 500 mm wide body
- 3100 mm section lengths
- Quick, simple winch raising (winch included)
- Low maintenance aluminium construction
- Aluminium 75x50x6 RHS strong but lightweight
- 3.8m drawbar extension, can be modified to suit your club
- saves your SSV from rust
- 2 person carry handles
- 360deg rotatable
- serviceable mast, one person install
- 5 metre total height, two section design
- 6m available with extra guy wire
- Rotatable mast 360deg without the need to lower
- Guyed at the three metre mark for stablilty
- Serviceable design
- 3m to 8m mast heights
- 100x100 box
- up to 6.5m section lengths
- braked 1.2tonne winch
- Quick, simple winch raising
- Low maintenance galvanised construction
- 2m headframes available
- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 48 mm (OD) pole, various heights
- up to 40kg static load
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made and Engineered
- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 48 mm (OD) pole, various heights
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made
- cliplok brackets included
- Carrier grade mast,
- Designed for applications requiring high stability
- Hinged for easy equipment installation and servicing
- Galvanised 48 mm (OD) pole, various heights
- Collared design with three heavy duty foot plate
- Sliding collar with set-screw locking attachment
- 100% Australian made
- Carrier Grade
- Designed for applications requiring high stability
- Suitable for concrete, slate, and teracotta tile roof mounting
- Galvanised 48 mm (OD) pole, heights up to 3 metres
- Sliding collars with set-screw locking attachment
- Three threaded bar mounts that attach to underlying beams/rafters
- 100% Australian made
- ONLY AVAILABLE IN ORDER OF 5 UNITS OR MORE
- EXPERIENCED INSTALLERS ONLY
- Designed for equipment with large sail areas
- Constructed for minimal deflection
- Galvanised 76 mm (OD) pole, up to 3 metre height
- Three 5 mm heavy duty foot plates
- Clamping collar design with M12 bolts
- Heavy duty 4 mm jaw clamps
- Designed for applications requiring high stability
- Suitable for concrete, steel, wooden walls
- Galvanised 48 mm (OD) pole, heights up to 3 metres
- stainless base plates, corrosion resistant
- zinc fasteners with nylocs
- 100% Australian made
- Designed for equipment with large sail areas
- Modular, customisable BTS / eNB / WISP roof site
- Galvanised 114 mm (OD) pole, up to 3 metre height
- 20 mm heavy duty foot plate with 20 mm gussets
- Two 76 mm rotatable clamping stand-off arms
- Optional lightning spike
- Locally manufactured for quick leadtime
- Climbable foot-pegs to three metres
- Five metre total height, two section design
- Galvanised 48 mm (OD) pole
- Rotatable top section with optional mast heads
- Guyed at the three metre mark for exceptional stability
- Climbable foot-pegs to four metres
- Six metre total height, two section design
- Galvanised 48 mm (OD) pole
- Rotatable top section with optional mast heads
- Guyed at the three metre mark and five metre mark for exceptional stability
- 1000 mm face width
- 89x89 mm SHS, four-leg (square) design
- 42x4 CHS lattice webbing
- 6000 mm section length, 350 kg weight
- Hot dip galvanised to AS 4792
- Modular, buildable to heights of 6 to 30 m
- 25 year design working life
- Hot dip galvanised construction
- Ultra heavy duty engineered design
- To suit 75 to 110 mm (OD) poles
- 10 mm plate, 90x90 box section stand off 180 mm, fully welded
- Mounts any type of pipe, fully customisable to request
- 270L full
- marine grade Aluminium
- 800kg castor wheels
- 500mm Deep, 900mm Long, 600mm Wide
- For poles 20 to 114 mm in diameter
- Threaded design to vary offset distance
- Heavy duty clamp
- Parallel pipe offset mounting
- Universal mounting flange
- 360° azimuthal rotation
- Independently rotatable arms (180° elevation)
- Remote controlled
- Compatible with myinsight.io dashboard system
- Fine adjustments possible
- 150x75x6mm 6061 t5 aluminium
- 12mm base plate and gussets
- Any sizes
- Bolt together designs available for postage
-
Assessment of Damage: Initially, a thorough examination of the tiller arm is necessary to understand the extent of the damage. This helps in planning the repair process effectively.
-
Grinding and Cleaning: The damaged area is ground out to remove any fractured metal and to create a clean, fresh surface for welding. This step is crucial for ensuring that the welding adheres properly. Along with grinding, all paint and corrosion around the damaged area are removed to ensure a clean metal surface.
-
Welding Process: The tiller arm is then carefully welded back together. This requires precision and skill, especially given the nature of the material (typically aluminum for these tiller arms). The welding must be strong enough to withstand the operational stresses.
-
Reinforcement: To reinforce the repaired area and provide additional strength, a piece of 6005 T5 6mm aluminium is incorporated. This step is essential to ensure that the tiller arm can withstand the high-stress conditions of racing or patrolling without failing again.
-
Finishing: After the welding and reinforcement are completed, the area is typically ground smooth, and any necessary finishing touches are applied. This might include repainting the tiller arm to protect it from corrosion and to match the original look.
-
Quality Check and Testing: Finally, a thorough inspection and testing of the repaired tiller arm are necessary to ensure that the repair is successful and the arm is safe to use.
- Can Am Defender, Yamaha Viking, Kawasaki Mule
- full rust treatment and removal
- replacement sections cut out and welded back in if required
- anti corrosive paint applied over chassis
- full chassis lanolin coating
- brake replacement optional
- gets the vehicle back to a safe and operational condition
- 32mm body
- 20mm stand off mount
- hot dipped galvanised
- 12mm driving plate
- Designed for mounting sensors, cameras, and antennas
- Stainless Steel 50 mm (OD) pole, various heights
- Collared design with 5 mm thick foot plate
- Sliding collars with set-screw locking attachment
- 304 grade stainless steel
- clamping range 30mm to 114mm
- 3mm thick
- 90deg pressed ends
- 30mmx30mmx30mm
- thousands kept in stock
- 304 grade stainless steel
- 5mm thick
- 45deg pressed
- 600mm roof with 50mm 45deg press
- 5x 20mm holes
- 12mm dyna bolt holes for concrete pad installations
- Five and seven metre designs available
- High grade acetal and anodised aluminium construction
- Hand-portable, hand-raised design
- Quick-release locking
- Universal mounting spigot
- Innovative custom builds available
- 100% Australian Designed & Manufactured
- Flat surface mounted, such as concrete wall
- 1200 mm length, 320 mm stand-off distance
- 48 mm diameter pole
- galvanised steel construction
- Fully customisable, built to specification.