Modules & Components

APAC's range of aluminium solar mounts have been developed to satisfy the need for a durable, low deflection mounting platform that resists even the most intense of weather conditions. These simple solar mounts can be used for any pole-mounted solar application under the sun. Fully adjustable for any location. Light weight fully welded

The ap solar series' incorporates two sliding clamps allowing any degree to be achieved. fabricated from 50x50x3 aluminium 6005 t5 aluminium. light enoug to be installed by one person. 

Anti-twist torque arm assemblies are used to provide up to six-way guying to increase torsional resistance on towers supporting microwave/pencil beam antennas or surveillance cameras.

Attached to standard APAC AL340 aluminium lattice towers at any section by three heavy duty U-bolt clamps (not pictured). This system has been designed specifically to match APAC AL340 ground and roof mounted aluminium lattice towers (340 mm faced, 50 x 4 mm round tube). Supplied with 2 way guying kit, larger kits available upon application. 

APAC's AL500 series lattice modules feature three upright columns made from 76.2x4.75 CHS with 40x3 CHS lattice welded in between by certified boom welders, providing incredible strength. The series' 500 mm face width provides exceptional shear and torsional stiffness, necessary for many telecom applications. Each module is chemically cleaned and treated by hand, producing a brilliant finish.

APAC's AL340 Series aluminium lattice modules feature three upright columns made from 50x4 CHS with 32x3 CHS lattice welded in between by certified boom welders, providing incredible strength while retaining a lightweight design. Each module is chemically cleaned and treated by hand, producing a brilliant finish.

These sections are 3100 mm in length allowing postage anywhere in the globe. Spare modules have been listed for purchase separately for engineers seeking to build their own system, or as spares to extend the height of existing AL340 towers.

APAC's AL220 aluminium lattice modules feature three upright columns made from 42x3 CHS with 25x3 CHS lattice welded in between by certified boom welders, providing incredible strength while retaining a lightweight design. Each module is chemically cleaned and treated by hand, producing a brilliant finish.

These sections are 3100 mm in length allowing postage anywhere in the globe. Spare modules have been listed for purchase separately for engineers seeking to build their own system, or as spares to extend the height of existing AL220 towers.

Anti-twist torque arm assemblies are used to provide up to six-way guying to increase torsional resistance on towers supporting microwave/pencil beam antennas or surveillance cameras.