Catalog
Small Mounts
Small mounts include poles, posts, and other simple upright structures. They differ from towers which are those structures with a more complex design often involving horizontal faces and members.
- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 60 mm (OD) pole, various heights
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made
- 6061 Aluminium Construction.
- Suits Poles and Masts 20-50mm.
- Starlink Locking Mechanism Machined into Adaptor.
- Made in Caloundra, Sunshine Coast, QLD.
- Low Profile.
- Aluminium roof mount, universal stud pattern.
- Remove existing roof scews and mount using existing screw holes.
- This base is used on our guyed lattice towers up to 31m in height.
- 6061 Aluminium Construction.
- Made in Caloundra, Sunshine Coast, QLD.
- To Suit 75mm-100mm Drawbar.
- 300x50mm Mounting Tube Suits Most Starlink Pole Adaptors.
- Can be produced in minimum batches of 10 to suit custom specifications.
- Low Profile Aluminium Facia Mount.
- 200x80x6mm 6061 Mounting Plate with 50x4mm Tube.
- 300mm Standoff with 500mm Height.
- 6061 T5 Aluminium Construction
- Made locally in Caloundra, Sunshine Coast, QLD
- Suits most flat mounting surfaces - Roofs, Motorhomes, Caravans, Canopies etc.
- 50mm mounting spigot that suits our Starlink adaptor and most others on the market.
- 6061 T5 Aluminium construction
- Suits Ray Marine Radome
- Radome can be supplied to businesses within Australia, Bracket only available overseas.
- starlink locking mechanism machined in as standard,
- made locally in Caloundra Sunshine Coast QLD
- 6061 T5 Aluminium construction
- suits pole sizes 20-50mm
- starlink locking mechanism machined in as standard, don't rely just on a grub screw like other inferior brands.
- made locally in Caloundra Sunshine Coast QLD
- 500mm height as standard up to 1500mm
- various sizes available -please enquire
- Customisable sizes,
- suits most solar panel configurations
- 40 to 114mm pole sizes
- Tapered octagonal poles
- Aluminium construction
- Fully adjustable
- 6061 Aluminium Construction.
- Made in Caloundra, Sunshine Coast, QLD.
- 3x Guy Points.
- 100x50mm Mounting Tube to Suit Most Starlink Adaptors.
- Mounts to APAC Hand Raised Telescopic Masts (sold seperately).
- Al-ko Drawbar mount, 50mm, fits most drawbars
- Aluminium Towball mount, 50mm, fits most vehicles
- Three, Five and seven metre designs available
- High grade acetal and anodised aluminium construction
- Hand-portable, hand-raised design
- Quick-release locking
- Universal mounting spigot
- Innovative custom builds available
- 100% Australian Designed & Manufactured
- Climbable foot-pegs to three metres
- 5 metre total height, two section design
- Aluminium 60 mm (OD) pole, with 50 mm top section
- Rotatable top section with optional mast heads
- Guyed at the three and five metre marks for exceptional stability
- Entry-grade, low cost roof mast
- Galvanised 48 mm (OD) pole, various heights
- Screw-together design
- Roof pitches up to 45 degrees
- 100% Australian made
- 3g, 4g, 5g
- Bolt/Clamp.
- Includes a 10mm-16 X 135mm carriage bolt.
- two clamps per unit
- Slot will accommodate 19mm width Giant Band
- 1200mm of strapping included, custom sizes available.
- Pole mounted, clamp or U bolt option
- 1200 mm length, 320 mm stand-off distance
- Hot dip galvanised steel construction
- Clamping design with M12 bolts
- Heavy duty 4 mm jaw clamps
- Fully customisable, built to specification.
- 360deg rotatable
- serviceable mast, one person install
- 5 metre total height, two section design
- 6m available with extra guy wire
- Rotatable mast 360deg without the need to lower
- Guyed at the three metre mark for stablilty
- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 48 mm (OD) pole, various heights
- up to 40kg static load
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made and Engineered
- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 48 mm (OD) pole, various heights
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made
- cliplok brackets included
- Carrier grade mast,
- Designed for applications requiring high stability
- Hinged for easy equipment installation and servicing
- Galvanised 48 mm (OD) pole, various heights
- Collared design with three heavy duty foot plate
- Sliding collar with set-screw locking attachment
- 100% Australian made
- Carrier Grade
- Designed for applications requiring high stability
- Suitable for concrete, slate, and teracotta tile roof mounting
- Galvanised 48 mm (OD) pole, heights up to 3 metres
- Sliding collars with set-screw locking attachment
- Three threaded bar mounts that attach to underlying beams/rafters
- 100% Australian made
- ONLY AVAILABLE IN ORDER OF 5 UNITS OR MORE
- EXPERIENCED INSTALLERS ONLY
- Designed for equipment with large sail areas
- Constructed for minimal deflection
- Galvanised 76 mm (OD) pole, up to 3 metre height
- Three 5 mm heavy duty foot plates
- Clamping collar design with M12 bolts
- Heavy duty 4 mm jaw clamps
- Designed for applications requiring high stability
- Suitable for concrete, steel, wooden walls
- Galvanised 48 mm (OD) pole, heights up to 3 metres
- stainless base plates, corrosion resistant
- zinc fasteners with nylocs
- 100% Australian made
- Designed for equipment with large sail areas
- Modular, customisable BTS / eNB / WISP roof site
- Galvanised 114 mm (OD) pole, up to 3 metre height
- 20 mm heavy duty foot plate with 20 mm gussets
- Two 76 mm rotatable clamping stand-off arms
- Optional lightning spike
- Locally manufactured for quick leadtime
- Climbable foot-pegs to three metres
- Five metre total height, two section design
- Galvanised 48 mm (OD) pole
- Rotatable top section with optional mast heads
- Guyed at the three metre mark for exceptional stability
- Climbable foot-pegs to four metres
- Six metre total height, two section design
- Galvanised 48 mm (OD) pole
- Rotatable top section with optional mast heads
- Guyed at the three metre mark and five metre mark for exceptional stability
- 32mm body
- 20mm stand off mount
- hot dipped galvanised
- 12mm driving plate
- Designed for mounting sensors, cameras, and antennas
- Stainless Steel 50 mm (OD) pole, various heights
- Collared design with 5 mm thick foot plate
- Sliding collars with set-screw locking attachment
- Flat surface mounted, such as concrete wall
- 1200 mm length, 320 mm stand-off distance
- 48 mm diameter pole
- galvanised steel construction
- Fully customisable, built to specification.