- Carrier Grade
- Designed for applications requiring high stability
- Constructed for minimal deflection
- Galvanised 48 mm (OD) pole, various heights
- Collared design with three heavy duty foot plates
- Sliding collar with set-screw locking attachment
- 100% Australian made
- cliplok brackets included
APAC's range of galvanised steel roof masts have been developed to satisfy the need for a durable, low deflection mounting platform that resists even the most intense of weather conditions. These simple roof masts can be used for any pole-mounted device under the sun; microwave dishes, weather monitoring, CCTV, solar panels, radio transmitters, data acquisition, GPS, starlink, and surveying equipment.
The GC48 series' collared design incorporates two sliding collars allowing stay bars to be attached to the centre mast without invalidating engineering certification by drilling new holes to vary the stay bar pitch angle. This design is safe, fast, and heavy duty, and is available in a range of different heights. The footplate has a hinged design allowing pitch compensation for standard corrugated iron and tin roofs.
Sub-6 GHz microwave transmission requires strict tolerances with respect to deflection and rotation, and the large dish size assocated with the lower frequency operation can add significant wind load. 48 mm roof masts are essential for reliable operation of point to point / multipoint wireless transmission in any weather condition. For 6 to 80 GHz licensed-band microwave transmission we recommend the GC76 76 mm roof mast.
Designed and built by APAC in the Sunshine Coast, Australia, you can expect uncompromising standards and a robust, real-world tested mast that will provide the peace of mind that it will perform it's intended role for many years to come. If you have specific requirements our team are able to re-design the mast to suit.