Catalog
Brackets
Brackets are used to attach additional pipe, weldments, and equipment to a mount, mast, or tower. The term bracket is often used interchangeably with clamp, however clamps tend to involve the tightning of opposing surfaces, where brackets can involve attachment using U bolts or fixings.
- 6061 T5 Aluminium construction
- suits apac telescopic mast
- starlink locking mechanism machined in as standard, don't rely just on a grub screw like other inferior brands.
- made locally in Caloundra Sunshine Coast QLD
- telescopic mast available separately
- 4x guy points
- Low Profile 150mm from roof
- Aluminium roof mount, universal stud pattern
- remove tek scews and mount onto existing screw holes
- This base is used on our roof towers and can handle 31m
- 6061 T5 Aluminium construction
- starlink locking mechanism machined in as standard, don't rely just on a grub screw like other inferior brands.
- made locally in Caloundra Sunshine Coast QLD
- 75-100mm drawbar sizes available. can be modified -please ask
- Low Profile
- Aluminium Facia mount,
- 2 or 4 holed stud pattern
- made from 50x4 tube and a 10mm thick fastening plate
- 6061 T5 Aluminium construction
- suits pole sizes 20-50mm
- starlink locking mechanism machined in as standard, don't rely just on a grub screw like other inferior brands.
- made locally in Caloundra Sunshine Coast QLD
- 75-100mm drawbar sizes available. can be modified -please ask
- 6061 T5 Aluminium construction
- suits pole sizes 20-50mm
- starlink locking mechanism machined in as standard, don't rely just on a grub screw like other inferior brands.
- made locally in Caloundra Sunshine Coast QLD
- 500mm height as standard up to 1500mm
- various sizes available -please enquire
- Suits any application where you need an offset/standoff mount
- For masts 14 to 114 mm in diameter
- Heavy duty clamp
- 10 mm material
- Offset mounting
- Custom designed
- Customisable sizes,
- suits most solar panel configurations
- 40 to 114mm pole sizes
- Tapered octagonal poles
- Aluminium construction
- Fully adjustable
- Bolt/Clamp.
- Includes a 10mm-16 X 135mm carriage bolt.
- two clamps per unit
- Slot will accommodate 19mm width Giant Band
- 1200mm of strapping included, custom sizes available.
- Perpendicular (90º) right angle mount
- For poles 20 to 114 mm in diameter
- 3 mm Stainless
- Fully customisable
- Hot dip galvanised construction
- Ultra heavy duty engineered design
- To suit 75 to 110 mm (OD) poles
- 10 mm plate, 90x90 box section stand off 180 mm, fully welded
- Mounts any type of pipe, fully customisable to request
- For poles 20 to 114 mm in diameter
- Threaded design to vary offset distance
- Heavy duty clamp
- Parallel pipe offset mounting
- 304 grade stainless steel
- clamping range 30mm to 114mm
- 3mm thick
- 90deg pressed ends
- 30mmx30mmx30mm
- thousands kept in stock
- 304 grade stainless steel
- 5mm thick
- 45deg pressed
- 600mm roof with 50mm 45deg press
- 5x 20mm holes
- 12mm dyna bolt holes for concrete pad installations