- 25 x 25 mm dimension
- 2.5 mm wall thickness
- AS 1163-C350L0 specification
- 350 MPa minimum yield strength
- 430 MPa minimum tensile strength
- Galvanised to AS 4792 (Duragal)
In addition to fabrication, APAC can supply raw materials cut to length for your project. The nature of the Australian telecommunications industry often involves buildings comms infrastructure in difficult to access locations, where freighting of pre-built metal structures is not practical or economical. APAC supplies cut-lengths of frame work, such as square hollow section, and fittings to permit the assembly of structures on site.
Grade C350
Grade C350 SHS is a high strength cold formed hollow section manufactured using high frequency Electric Resistance Welding (ERW), and is ideal for general mechanical and light structural applications. The cold-forming process enhances the strength, hardness and surface finish of the tube and produces SHS to tight dimensional tolerances.
Specifications
Manufactured and tested to meet the requirements of the following specifications:
- AS 1163 Structural Steel Hollow Sections (Grade C350, C350L0).
- AS 4792 Hot-dipped galvanised coating on ferrous hollow sections. Applied by a continuous or a specialised process.