- 40 x 40 mm dimension
- 2.5 mm wall thickness
- AS/NZS 3679 specification
- 350 MPa minimum yield strength
- 400 MPa minimum tensile strength
- Duragal galvanised (equivalent practice to AS/NZS 4791:2006)
In addition to fabrication, APAC can supply raw materials cut to length for your project. The nature of the Australian telecommunications industry often involves buildings comms infrastructure in difficult to access locations, where freighting of pre-built metal structures is not practical or economical. APAC supplies cut-lengths of frame work, such as angle, and fittings to permit the assembly of structures on site.
Grade C350 Angle
Grade C350 angle is a high strength hot rolled open section ideal for general mechanical and light structural applications. Also known as angle iron, or steel angle bar, angle is a hot-rolled carbon steel with an L-shaped cross section, with both equal and unequal types having a 90° angle.
Specifications
Manufactured and tested to meet the requirements of the following specifications:
- AS/NZS 3679 Structural steel hot-rolled bars and sections
- AS 4791 Hot-dip galvanized (zinc) coating on ferrous open sections applied by an in-line process - note: zinc aluminium coating classes are not currently referenced in AS/NZS 4791-2006