ATR Guy Wire Kit
Six 4 mm 7x19 galvanised guy wires
Head plate and guy plate for the ATM50 pole
Hook-and-eye turnbuckles, thimbles and grips
Six 300 mm marquee pegs included
Included with the ATR50G
The ATR guy wire kit steadies the ATR50 tripod mast. A head plate bolts to the pole's top cap and a guy plate sits on the second section's collar; from each, three 4 mm 7x19 galvanised wire rope guys run out over the tripod's legs.
Each guy has a thimble eye with three wire rope grips at each end and a hook-and-eye turnbuckle for tensioning. The top guys are cut 5.5 m and the mid guys 3.5 m, longer than an installation needs, so the excess is trimmed or coiled at the peg.
Six 300 mm steel marquee pegs are included for temporary installations; permanent installations can use duckbill anchors instead (not supplied). The kit comes with the ATR50G.
Part Code
AP-ATR-GWK-GAL
