ATR50 Tripod Telescopic Mast - Up to 4.1m
The ATR50 puts the ATM50 telescopic pole on a low, welded aluminium tripod for rapid deployment on the ground: three folding 32 mm square tube legs, 1.8 m across the feet, with the pole's base section held in the tripod's hub. Fully extended, the top cap stands 4.1 m above the ground.
Each leg pivots on a bolt at the hub, is locked by a second bolt, and folds up against the pole for carrying. The feet have holes for ground pegs.
The guyed ATR50G adds the ATR guy wire kit: three guys from a plate on the second section and three from a head plate on the top cap, run out over the legs to six marquee pegs with hook-and-eye turnbuckles. The top cap carries an M12 centre thread for antennas with an M12 stud and, on the unguyed ATR50, the four-hole TR76 bolt pattern.
Specifications
Physical Specification
Interfaces
Installation / Attachment
| Quantity | Notes |
|---|---|
|
3
|
Three folding legs, Ø12 peg holes in the feet
|
Available Interfaces
| Quantity | Interfaces | Notes |
|---|---|---|
|
1
|
M12 Tapped Hole
|
For attaching antennas with an M12 stud (e.g., RFI)
|
|
1
|
TR76 Bolt Pattern
|
For attaching TR76 brackets (suit Starlink, cameras, etc)
|
Subcomponents
Subcomponents
| Quantity | Bundled Components |
|---|---|
|
1
|
|
|
3
|
|
|
3
|
|
|
3
|
|
|
3
|
|
|
3
|
|
|
3
|
| Quantity | Item | Materials | Material Finish |
|---|---|---|---|
|
1
|
Tripod Hub: 6 mm Plate, Hinge Lugs and Hub Ring, Welded
|
Aluminium
|
Bright/Pickled Finish
|
|
3
|
Folding Leg, 32x32x3 mm SHS, with Foot Post, Gusset and Peg Cap
|
Aluminium
|
Bright/Pickled Finish
|