AL5 Solar Power System - 2,400 W

2,400 W solar: 4 x AIKO 600 W panels
10.24 to 20.48 kWh LiFePO4 battery (2 to 4 ZYC Simpo 5000 modules)
Optional Victron MultiPlus-II 5 kVA inverter-charger with an internal 230 VAC double GPO
Four 48 VDC circuits and four IP67 PoE++ Ethernet ports
Remote monitoring through Victron VRM

APAC's 2,400 W AL5 Solar Power System is a complete off-grid power system for remote sites, built into a Wescor AL5 aluminium cabinet (IP55): 4 AIKO 600 W solar panels (2,400 W at STC), a Victron SmartSolar MPPT 150/45 charge controller and two to four ZYC Simpo 5000 lithium iron phosphate (LiFePO4) battery modules of 5.12 kWh each. A Victron Cerbo GX monitors and manages the system remotely through Victron's VRM portal.

Choose it with a Victron MultiPlus-II 48/5000 inverter-charger, for 230 VAC power at an internal double GPO (4000 W continuous) and charging from a generator or mains power, or as a DC-only system. Every system has four 48 VDC equipment circuits and a Weidmüller Gigabit PoE switch, powered by a Victron Orion-Tr isolated converter, with four IP67 RJ45 connectors on the outside of the cabinet.

The panels mount on an APAC solar frame chosen to suit the platform, sold separately. The cabinet's top bay is left free for the customer's equipment in a 4RU shock-mount rack; a 6RU shock-mount rack can be fitted instead, which limits the battery to three modules.

Part Code
AP-SPS-AL5-2400-2B-AC

Specifications

Physical Specifications

Subtype
Off-Grid Solar Power System
Mounting
Anchor Bolts
Ingress Protection Rating
IP55
Min. Operating Temperature
-20 °C
Max. Operating Temperature
50 °C
Dimensions
1,500 × 617 × 1,020 mm
Weight
345 kg

Battery Specifications

Battery Type
LiFePO4
Battery Voltage
51.2 Vdc
Battery Energy
10240 Wh
Cycle Life
8000 cycles
Max. Expanded Capacity
20480 Wh
Min. Charging Temperature
-10 °C
Max. Charging Temperature
55 °C

Power Specifications

Inverter
Continuous Power
4000 W
Surge Power
9000 W
Waveform
Pure Sine Wave
Output Frequency
50 Hz

Power Ports

Direction Connector Quantity Voltage Type Nominal Voltages Min. Voltage Max. Voltage Max. Current Max. Power Charge Sources Notes
Input
MC4
DC
150 V
50 A
2600 W
Solar
Solar: Victron SmartSolar MPPT 150/45, 45 A charge; max. current is the PV short-circuit limit
Input
AC
230 Vac
187 V
265 V
50 A
Generator
Mains
Generator or mains through the inverter's transfer switch; charges at up to 70 A
Output
IEC Type I (AU Plug)
2
AC
230 Vac
4000 W
Internal double GPO inside the cabinet (no external AC outlet), pure sine: 4000 W continuous at 25 °C, 3700 W at 40 °C
Output
4
DC
48 Vdc
40.8 V
58.08 V
16 A
Equipment circuits from the battery, breakers sized to the equipment (typically 16 A)
Output
RJ45, IP67 Sealed
4
DC
60 W
Gigabit PoE (IEEE 802.3af/at/bt), 144 W in all, through IP67 connectors on the cabinet
Remote Monitoring
Yes

Solar Specifications

PV Module
AIKO-A600-MAH72Dw
No. Modules
4
Module Power (STC)
600 W
Array Power (STC)
2400 W
Configuration
2S2P

Subcomponents

Subcomponents

Quantity Bundled Components
1
Wescor AL5 Solar Battery & Equipment Cabinet, 1020H x 1400W x 585D, Aluminium, IP55
Quantity Item
1
Victron MultiPlus-II 48/5000/70-50 230V inverter-charger
1
Victron Cerbo GX system monitor (VRM remote monitoring)
2
ZYC Simpo 5000 51.2 V 100 Ah (5.12 kWh) LiFePO4 battery module
1
Victron SmartSolar MPPT 150/45 solar charge controller
1
Victron Orion-Tr 48/48-6 isolated DC-DC converter (280 W)
1
Weidmüller IE-SW-BLB-05-1GT-4GTPOE Gigabit PoE++ switch (4 PoE ports, 144 W)
4
Amphenol LTW ROP-series IP67 RJ45 connector, cabinet wall
1
EDUP DC-DC PoE injector for Starlink
4
AIKO Comet 2N+ AIKO-A600-MAH72Dw 600 W PV module, 2323 x 1134 mm