Two-Panel Tilting Solar Frame to suit GSK3 Skid
Two-panel solar frame, modules in portrait
Panel tilt adjustable from 36° to 49°
Stows vertical for transport
Bolts down to the GSK3 skid, or welds on
Galvanised steel, Schletter aluminium rails and clamps
This two-panel tilting solar frame is built for the GSK3 galvanised steel skid. A galvanised steel stand of two 75 mm SHS posts on braced foot plates carries a 2300 x 2070 mm frame on pivot bolts at its top, with three Schletter Solo aluminium rails and 30-40 mm end and mid clamps for two framed modules in portrait.
Two support arms run from the posts to a row of holes in the frame's outer edges, setting the panels at 36° to 49° to the horizontal in steps of about 2°. For transport, the arms move to a stow hole and the frame hangs vertical.
Each foot plate takes six M12 bolts down through a 127 mm runner, as on the GSK3, or can be welded to the chassis for permanent installations.
Part Code
AP-SF-2PF
Specifications
Physical Specification
System
GSK3
Subtype
Mounting Bracket
Materials
Steel
Aluminium
Material Finish
Hot-Dip Galvanised
Mounting
Screw / Bolt
Dimensions
1,724 × 2,315 × 1,987 mm
Weight
140.9 kg
Interfaces
Installation / Attachment
| Quantity | Mounting | Notes |
|---|---|---|
|
12
|
Screw / Bolt
|
Two 127 x 560 mm foot plates at 2005 mm centres, six Ø14 holes each for M12 bolts (or welded)
|
Available Interfaces
| Quantity | Interfaces | Notes |
|---|---|---|
|
3
|
Solar Mounting Rail
|
Two modules in portrait, 30-40 mm frames
|
Subcomponents
Subcomponents
| Quantity | Bundled Components |
|---|---|
|
6
|
|
|
3
|
|
|
2
|
|
|
2
|
|
|
4
|
|
|
2
|
|
|
2
|
|
|
4
|
|
|
8
|
|
|
12
|
|
|
12
|
| Quantity | Item | Materials | Material Finish |
|---|---|---|---|
|
1
|
Solar Stand: 75x75x4 SHS Posts, 75x50x3 RHS Crossbeams and 60° Braces, 12 mm Foot and Hinge Plates, Welded
|
Steel
|
Hot-Dip Galvanised
|
|
1
|
Tilting Frame, 2300 x 2070 mm, 40x40x3 SHS, Welded
|
Steel
|
Hot-Dip Galvanised
|
|
2
|
Support Arm, 40x40x3 SHS, 1060 mm Pin to Pin
|
Steel
|
Hot-Dip Galvanised
|
|
3
|
Schletter Solo 120005 Module Rail, 2200 mm
|
Aluminium 6005-T5
|
Mill Finish
|
|
12
|
M8 Square Nut, Stainless Steel A4
|
Stainless Steel 316
|
|
|
2
|
Crush Sleeve, 17.2x2.3 CHS
|
Steel
|
Hot-Dip Galvanised
|
|
4
|
Arm Spacer, 10 mm
|
Steel
|
Hot-Dip Galvanised
|
