Two-Panel Solar Frame to suit AL220/AL340 Tower Series

Solar Frame for triangular towers

Adjustable panel tilt

Suits both AL220 and AL340

This is a two-panel solar mounting frame designed for the APAC AL340 Aluminium Tower System. It is designed to affix two 175 W (or similar dimension) solar panels to an AL340 tower module. While customisable on request, the standard mount supports solar panels up to 700 mm wide. As the rails are spaced 1050 mm apart, panels shorter than this length may not be suitable without additional componentry.

The bracket attaches to the AL340's 50 mm uprights using U-Bolts, and uses standard solar clamps to secure the solar panels. The panel tilt is set by the height at which the prop's U-bolted bracket is clamped to the tower leg. The underside of the solar panels can be protected with an optional bolt-on perforated screen.

The bracket has additional slots permitting it to be attached to the smaller faced AL220 Tower System. The AL220 version is supplied with 40 mm U-bolts for the AL220's chords.

Part Code

AP-AL340-2SPM

Specifications

Physical Specification

System

AL340

Subtype

Solar Bracket

Materials

Aluminium

Material Finish

Bright/Pickled Finish

Mounting

Tri-Clamp Triangular Interface

Dimensions

1,000 × 2,050 × 970 mm

Weight

11.2 kg

Interfaces

Installation / Attachment

Quantity	Mounting	Notes
1	Tri-Clamp Triangular Interface	U-bolted to the 50 mm chords of an AL340 tower: two across one face, one for the prop

Available Interfaces

Quantity	Interfaces	Notes
2	Solar Mounting Rail	Max panel width 700 mm

Subcomponents

Quantity	Bundled Components
8	Solar End Clamp
3	U-Bolt, 50 mm Rounded, 100 mm Long
2	Hex Bolt, Stainless Steel - M12 x 50mm Standard Thread
14	Hex Bolt, Stainless Steel - M12 x 70mm Standard Thread
2	Hex Bolt, Stainless Steel - M12 x 90mm Standard Thread
18	Hex Nut, Stainless Steel - M12 Standard Thread
18	Flat Washer, Stainless Steel - M12