B48 Screw Down Roof Mast, 48mm Pole
APAC have launched a range of budget masts for quick, low cost installations. The B48 Budget Roof Mast is a 48 mm diameter galvanised pole with two stay bars attached to the mast by tek screws or hose clamps. Despite its simplicity, this design is quick and effective and most importantly low cost. The footplate has a hinged design allowing pitch compensation for standard corrugated iron and tin roofs.
The masts allow for easy attachment of any equipment that can be clamped or slotted over 48 mm diameter poles. This makes them suitable for applications requiring elevated mounting, such as communication systems or surveillance equipment.
Installation of the tin roof design uses the existing roof screw holes. Screws are removed, the foot plate and stay bars positioned, and screws are weatherproofed and replaced.
Specifications
Physical Specifications
Interfaces
Installation / Attachment
| Quantity | Mounting | Notes |
|---|---|---|
|
4
|
Screw / Bolt
|
Attaches to metal roof using standard roof screws
|
Available Attachment Interfaces
| Quantity | Interfaces | Notes |
|---|---|---|
|
1
|
Pole 48 mm ⌀
|
Allows clamping of any equipment supporting 48 mm diameter poles
|
|
1
|
Pole Spigot, 48 mm ⌀ OD
|
Allows equipment to be mounted over the top of the pole, such as a headframe
|
Subcomponents
Subcomponents
| Quantity | Item | Materials | Material Finish |
|---|---|---|---|
|
1
|
2.0 m Centre Pole, 48.3 O/D x 2.90 mm CHS Pipe
|
Steel Hollow Section AS 1163-C350LO
|
Galvanised Coating
|
|
1
|
Centre Pole Foot Plate, with M10 Bolt & Nyloc Nut
|
Stainless Steel 304
|
Mill Finish
|
|
2
|
1.6 m Stay Bar, 26.9 O/D x 2.35 mm CHS Pipe
|
Steel Hollow Section AS 1163-C350LO
|
Galvanised Coating
|