Catalog
Guyed Towers
APAC's range of guyed towers include aluminium and galvanised steel designs. We also manufacture a series of guyed monopoles locally here in Queensland, known as the AT60 and AT90 series.
Guyed Towers vs Free Standing Towers?
While both have their advantages, selection depends on what you have available. Free-standing towers require a smaller footprint and are an excellent choice when there's limited land available. Guyed towers on the other hand use the least amount of tower steel per metre of height, but require the largest use of land. When land is cheap (and relatively open) a guyed tower is typically the most cost effective choice. On the other hand, you have four foundations to set in addition to all of the guying materials.
APAC specialise in manufacturing lightweight guyed tower systems, which include the following:
-- AL220 Series (220 mm Faced, Aluminium) --
-- AL340 Series (340 mm Faced, Aluminium) --
-- AL500 Series (500 mm Faced, Aluminium) --
- Ultra lightweight fully engineered design
- 3.1 to 21 m tower heights
- 220 mm wide body (180 mm faced)
- 3100 mm modular lengths
- 42x3 mm aluminium CHS legs
- 25x3 mm lattice braces
- Low maintenance aluminium construction
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 18.6 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 galvanised steel guy wires
- 3.1 to 21.7 m tower models available
- AL220 design workable to 37m
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 3 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 galvanised steel guy wires
- 3.1 to 21.7 m tower models available
- AL220 design workable to 37m.
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 6 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 stainless steel guy wires
- 3.1 to 21.7 m tower models available
- Antennas up to 900mm
- Ultra lightweight, easy to raise
- Fully engineered design
- Climbable to full 9 metres
- Machined 50 tonne universal-joint base
- 6 mm 7x19 stainless steel guy wires
- 3.1 to 21.7 m tower models available
- Antennas up to 900mm
- Lightweight fully engineered design
- 3.1 to 40.7 m tower heights
- 340 mm wide body
- 3100 mm modular lengths
- 50 x 4 mm aluminium CHS legs
- 32 x 3 mm lattice structure
- Low maintenance aluminium construction
- Antennas up to 900mm
- Ultra lightweight fully engineered design
- 3.1 to 40 m tower heights
- 340 mm wide body (300 mm faced)
- 3100 mm modular lengths
- 50x4 mm aluminium CHS legs
- 32x3 mm lattice braces
- Low maintenance aluminium construction
- Antennas up to 900mm
- Ultra lightweight fully engineered design
- 3.1 to 40 m tower heights
- 340 mm wide body (300 mm faced)
- 3100 mm modular lengths
- 50x4 mm aluminium CHS legs
- 32x3 mm lattice braces
- Low maintenance aluminium construction
- Antennas up to 900mm
- 3.1 to 37.2 m tower heights
- 500 mm wide body
- 3100 mm modular lengths
- 76.2 x 4.75 mm aluminium CHS legs
- 40 x 3 mm lattice structure
- Low maintenance aluminium construction
- 90 O/D x 3 mm aluminium monopole
- 300 mm step spacing
- 3000 mm section lengths
- Very light weight, easily raised
- Low maintenance aluminium construction
- Stackable modular mast to a height of 12 m
- Australian designed and manufactured.
- 90 O/D x 3 mm aluminium monopole
- 300 mm step spacing
- 3000 mm section lengths
- Very light weight, easily raised
- Machined 50 tonne universal-joint base
- Stackable modular mast to a height of 12 m
- Australian designed and manufactured.
- 450 mm face width
- 60 mm diameter, three-leg (triangular) design
- 20mm solid webbing
- 6300 mm section length
- Hot dip galvanised to AS 4792
- Modular
- 25 year design working life
- 50m in height available under existing engineering with greater heights available on a case by case basis.
- Engineered